The Wall Mount Guardrail system provides permanent full-perimeter fall protection with a unique design that allows water-tight installation using a dual plate mounting system. The dual plate mounting system allows roof flashing to be installed over the base plate and creates a compression seal around mounting studs when the upright plate is attached.  The Wall Mount Guardrail system is available in powder coat colors to match Kynar® sheet metal or other building components and RAL colors.  The PRS Wall Mount Guardrail system meets and exceeds OSHA Standards and International Building Codes (ICC).  


Leading Edge Safety provides a never seen before mounting system for wall-mounted attachment with a patent-pending backup plate system to ensure water-tight installation. This product’s dual-plate mounting system provides full-perimeter fall protection with water-tight installation to the inside of parapet walls, preventing potential water infiltration that could damage the structure and interior of the building.

With a commitment to providing the safest fall protection guardrails, you can enjoy peace of mind on the next low-slope roofing project that requires attachment to the inside of parapet walls. Leading Edge Safety takes you the top, so you can safely reach great heights.

  • Full perimeter fall protection
  • Designed for permanent applications
  • Attachment not visible from the ground
  • Backup plates for water-tight installation
  • Mounts to inside of parapet walls
  • No cutting or welding
  • Easy to install
  • Ideal for new construction or retro-fit
  • Powder Coated Steel
  • Made in the USA
  • Meets and exceeds OSHA 29 CFR 1910.23 and OSHA 29 CFR 1926.502
Uprights 1.25” schedule 40 steel pipe (ASTM A53) - 1.66” O.D. x .140” wall
Mounting Bracket 3/16” steel plate (ASTM A36) bracket with pre-punched holes for mounting stud attachment.
Horizontal Rails 1.625” x .065” and 1.375” x .065” (ASTM C1008/1010) steel tube adjustable slide rails.
Hardware 3/8”-16 x 1” zinc plated fasteners.
Uprights Custom designed to OSHA standards
Horizontal Rails 8’-0 o.c.; 120” to 170”, 70” to 43” 43” to 29” adjustable
Corners 20.5” o.c. outside corner; 12.5” o.c. inside corner
Uprights 18 LBS +/-
Horizontal Rails 1 LBS / lineal foot +/-
Corners 2 LBS +/-
Meets and Exceeds OHSA standard CFR 29 1910.501, 29 1910.502, 20.1910.23 CAL-OSHA §1620,, CAL-OSHA §1621, CAL-OSHA §3209, CAL-OSHA §3210, ANSI/ASSE A1264.1-2007, USACE EM 385-1-1 (21.E.01 a-c)
1 year Manufactures limited waranty covers any defects from 1 year of purchase date