USM-IBC
USM-IBC Guardrail

The USM-IBC Guardrail system provides permanent full-perimeter fall protection with a unique design that allows 100% water-tight installation under standard roofing and sheet metal details including coping caps, drip edges, gravel stops and even inside most commercial gutters without penetrating the roof membrane.  Our “Zero Penetration” attachment under standard perimeter edge details allows full access to the entire roof surface, wall flashings and sheet metal.  The USM-IBC Guardrail system can be installed prior to roof construction and even left in place during complete roof replacement.  Powder coated steel colors available to match Kynar® sheet metal or other building components and RAL colors. USM-IBC Guardrail meets and exceeds OSHA Standards and International Building Codes (ICC).  

The unique mounting and upright design allows our guardrail system to remain in place whether it’s a complete re-roof project, edge metal replacement, equipment maintenance, facility lighting or security camera work, our guardrail remains in place providing full-perimeter fall protection. Leading Edge Safety’s patent pending design allows for guardrail installation under most coping cap, drip edges, gravel stop and inside gutter systems. Installation of the permanent guardrails can typically be installed using the existing coping cap metal, eliminating the added cost of new metal.   

USM-IBC Guardrail, uprights are designed to keep workers away from the leading edge while still allowing full access to the roof surface and building perimeter.

PRS Standard Guardrail eliminates the need for tie-off points and the expensive associated maintenance and training.

  • Permanent fall protection
  • Easy to install
  • “Zero Penetration” attachment
  • 100% water-tight installation
  • Installs under standard roofing & sheet metal details
  • Allows for complete access to the entire roof surface and wall flashings
  • Eliminates the need for pitch pans
  • Can be installed prior to roof construction
  • Can be left in place during complete roof replacement
  • Custom colors to match building components
  • Powder coat finish
  • Meets and Exceeds OSHA CFR 29 1926.502, OSHA CFR 29 1910.23 and ICC Codes
  • Made in the U.S.A.
Materials
Uprights 1.66” x 0.140” schedule 40 pipe (ASTM A53) welded to 2”x3” x 3.5” steel block (ASTM A36) bracket with pre-punched holes and slots for permanent structural attachment
Horizontal Rails 1.625” x 0.065” and 1.375” x 0.065” (ASTM C1008/1010) steel tube adjustable slide rails.
Hardware 3/8”-16 x 1” zinc plated fasteners
Sizes
Uprights Custom designed to OSHA standards
Horizontal Rails 8’-0 o.c.; 120” to 170”, 70” to 43” 43” to 29” adjustable
Corners 20.5” o.c. outside corner; 12.5” o.c. inside corner
Weight
Uprights 12 LBS +/-
Horizontal Rails 1 LB/ lineal foot +/-
Corners 2 LBS +/-
Standards
Meets and exceeds OSHA CFR 29 1910.501, 29 1910.502, 20.1910.23 CAL-OSHA §1620,, CAL-OSHA §1621, CAL-OSHA §3209, CAL-OSHA §3210; ANSI/ASSE A1264.1-2007; USACE EM 385-1-1 (21.E.01 a-c)
Warranty
1 year Manufactures limited waranty covers any defects from 1 year of purchase date