Deck Mount
Guardrail

The Deck Mount Guardrail system provides permanent full-perimeter fall protection with a unique design that allows pre-fabricated pipe boots to be used to flash stanchion penetrations, unlike traditional deck mount guardrails. Pipe flashings can be placed over the Deck Mount uprights prior to installation of the horizontal railing, a preferred method over field wrapping penetrations. Unlike traditional systems, horizontal rails can be removed during future reroofs to allow new pipe flashings to be installed. Powder coated steel colors available to match Kynar® sheet metal or other building components and RAL colors. Deck Mount Guardrail meets and exceeds OSHA Standards and International Building Codes (ICC).  

The unique installation of our PRS Deck Mount Guardrail system allows installation with the use of pre-fabricated roof flashings and eliminates the need for on-site welding. The modular design is easier to handle then traditional bulky pre-fabricated systems and arrives on-site prefinished versus in-the-field painting.  Leaky pitch pans are no longer needed when a deck mounted guardrail system is required for your project!

  • Permanent fall protection
  • Easy to install
  • Allows use of pre-fabricated pipe flashings
  • Eliminates the need for pitch pans
  • Can be installed prior to roof construction
  • Can be left in place during complete roof replacement
  • Custom colors to match building components
  • Powder coat finish
  • Made in the U.S.A.
  • Meets and Exceeds OSHA CFR 29 1926.502 and CFR 29 1910.23 and ICC Codes
Materials
Uprights 1.625” x .25” steel tube (ASTM A-513-5-08A DOM Grade 1026) welded to 6” diameter x 3/8” steel plate (ASTM A-572) with pre-punched holes for permanent structural attachment.
Horizontal Rails 1.625” x .065” and 1.375” x .065” (ASTM A-513 DOM Grade 1020) steel tube adjustable slide rails.
Hardware 3/8”-16 x 1” zinc plated steel
Sizes
Uprights Custom designed per project to IBC 2006 requirements.
Horizontal Rails 8’-0” o.c.; 120” to 70”, 70” to 43”, 43” to 29” Adjustable
Corner 20.5” o.c. Outside Corner; 12.5” o.c. Inside Corner
Weight
Uprights 25 LBS
Horizontal Rails 1 LB per lineal foot
Corners 2 LBS
Standards
Meets and Exceeds IBS 2006 1607.7, OHSA Standard 29 CFR 1926.501, 1926.502, 1910.23, Cal-OSHA §1620, §1621, §3209, §3210, ICC 2012 Building Codes, ANSI/ ASEE A1264.1-2007, and USACE EM 385-1-1 (21.E.01 a-c)